Your preferred solution for lifting concrete slabs

POLYTEK 360 is your preferred and effective solution for lifting concrete slabs, and is just a fraction of the cost of replacement. Over time, sub-surface water erosion, unstable soils, and poor compaction can all lead to uneven settling. POLYTEK 360 technology can expertly restore your concrete slabs to their correct levels.

Sunken slabs are restored with precision results

POLYTEK 360’s skilled site technicians lift concrete slabs by injecting polyurethane foam in the areas below the slab. Small holes are drilled in the surface. Then, POLYTEK 360 materials are injected under the slab. The foam expands into the void, lifting the sunken slab, and accurately restoring it to its correct height with precision results.

Our Process

Here's How Slab Lifting Works

If sub-surface water erosion, unstable soils, or poor compaction has led to your concrete slab sinking, or other voids have appeared on your work site, you need slab lifting.

1

POLYTEK 360 client representative visits your site, assesses the problem, and writes a report with recommended solutions.

2

Now, POLYTEK 360 is on site. The POLYTEK 360 technician conducts an on-site assessment and prepares to begin remediation work.

3

Next, the POLYTEK 360technician drills an infrequent series of small holes – the size of a penny – in the slab.

4

Next, the POLYTEK 360technician drills an infrequent series of small holes – the size of a penny – in the slab.

5

Larger slabs may require additional void filling. The technician uses his experience and knowledge of equipment and material feedback to determine when each area to be filled has reached capacity.

6

After just 15 minutes, the newly injected materials are 90% cured. Your slab problems are solved, and the treated area is ready to be put back into service. Driveways and sidewalks, garage pads, trip hazards, interior concrete floors, loading docks, factory floors, bridge approaches, concrete roadways.

Environmentally friendly and water-repellent

Our soil stabilization material’s inert qualities make it completely safe for the environment, without risk of leaching into surrounding areas. In addition, its density and water-repellent characteristics will actually displace water during application and block water pathways, helping to prevent further water-related problems from occurring.

Solves soil stabilization problems quickly and cost-effectively

The POLYTEK 360 solution is effective in binding and conglomerating non-cohesive soils, thereby increasing the load-bearing capacity. POLYTEK 360 effectively solves soil stabilization issues quickly, cleanly, and cost-effectively. Whether your soil stabilization problems are in commercial, domestic, or industrial locations, POLYTEK 360 has you covered.

The POLYTEK 360 Advantage

  • Professional technicians, fast service, and a permanent solution
  • Non-disruptive, non-intrusive, clean, no dust or water, no excavations required
  • Proven process with precision results
  • Soil permeation and/or soil compaction
  • Light weight, adds little additional overburden, stabilizes subgrade
  • Impervious to water, eliminates water pathways and associated future problems
  • Insensitive to temperature changes and freeze/thaw cycles
  • Inert to the environment and water table
  • Can be injected directly in water-laden soils without compromise
  • Upon job completion, area is ready for immediate use including vehicular traffic

Ask about our TEN Year Materials Warranty.

Other Services

Soil Stabilization
Learn More
Void Filling
Learn More